Level Switches & Leak Detection
- Calibration Columns & Injection Quills
- Controllers & Indicators
- Guided Wave Radar Level Transmitters
- Intrinsically Safe Liquid Level Transmitters
- Intrinsically Safe Solids Level Transmitters
- Level Switches & Leak Detection
- Mounts & Connectivity
- Pulse Radar Level Transmitters
- Ultrasonic Level Transmitters
Flowline manufacture a range of single and multi-point level switches to provide spill prevention, pump protection, leak detection and alarm solutions.
Flowline’s Switch-Tek range can operate with mediums such as hydrochloric acid, acetone, diesel fuel oil (the Switch-Tek LU10 is an intrinsically safe level switch, more below), potable water, boric acid, sodium hypochlorite, wastewater, diluted caustic soda and copper sulphate.
To ascertain which level switch is suitable for your application see the individual model specifications below.
Flowline Switch-Tek LU10
The Flowline Switch-Tek LU10 is an intrinsically safe ultrasonic level switch which is CSA approved for use in hazardous locations and provides high or low liquid level detection of chemical, solvent or low viscosity petroleum based liquids with a 1A relay output.
Media examples include hydrochloric acid, acetone and diesel fuel oil. The submersible PP or PFA level switch sensor is universally mounted through the tank wall or inside the tank, and connected to a PLC or remote relay controller.
|Material||PP / PFA|
|Enclosure||NEMA 6 (IP68)|
|Mount||0.75inch NPT, 0.75inch BSP|