Tangit Glue Quantity Tool Icon

Tangit Solvent Cement & Primer Calculator

Calculate Henkel Tangit glue and primer quantities for a piping system installation
An illustration of a single join requiring glueing

What’s considered a join?

One join is any two surfaces which will be glued together. Note: If you are gluing together a 2 inch elbow and 2 inch pipe; that’s one 2 inch join.

How To Use This Tool

Enter the number of joins (per pipe/fitting size) into the table below to calculate how much solvent cement and cleaner you require. Amounts auto-update as you enter data and a total is calculated at the bottom.

Disclaimer / Warning

This tool is for reference use only. Always check your required quantities thoroughly. Reliance solely on this tool is to be undertaken at your own risk. Fusion accepts no responsibility for erroneous outputs provided by this tool.

Nominal Bore DN [inch]Nominal Bore DN [mm]Pipe Outer Diameter d [mm]Number of JointsUPVC Cement Required [Kg]UPVC Cleaner Required (Litres)
-12160.0000.000
0.515200.0000.000
0.7520250.0000.000
125320.0000.000
1.2532400.0000.000
1.540500.0000.000
250630.0000.000
2.565750.0000.000
380900.0000.000
41001100.0000.000
51251400.0000.000
61501600.0000.000
--2000.0000.000
82002250.0000.000
--2500.0000.000
102502800.0000.000
123003150.0000.000
TOTAL0.0000.000
hello world!
LOCATIONS
73 Bushland Ridge
Bibra Lake WA 6163

18 Woomera Place
Archerfield QLD 4108

OPEN
Mon - Thurs 8:00 - 4:30
Fri 8:00 - 4:00

Bureau Veritas ISO 9001 Certification Logo
Fusion Plastics and Fusion Piping Pty Ltd are ISO 9001 certified companies